Italiano English Francaise
 
GP20 | TRIMMING MACHINE
GP20    TRIMMING MACHINE This machine is particularly suitable for trimming the lining in the round and oval holes. The machine is settled on column for trimming finished shoes and on table for trimming uppers. It is possible turning the counter-punch rest during the working to trim in any point of the shoe or upper. The machine is adjustable to allow the trimming of linings with different thickness. The machine is equipped with a device for sharpening the punch and the counter-punch. ... Continue
 
LFN | PNEUMATIC LASTS PULLING MACHINE
LFN    PNEUMATIC LASTS PULLING MACHINE Pneumatic lasts pulling machine. It can pull both rigid and flexible lasts from a shoe, to make blake sewing of the sole or from a finished shoes before the finishing.
The pulling operation is totally pneumatic. This machine, practical and very easy to use, does not require any particular maintenance.
Continue
 
303 | LAST PULLING MACHINE
303    LAST PULLING MACHINE

Pneumatic hydraulic last pulling machine with fully adjustable pad.
 

Continue
 
301 | LAST PULLING MACHINE
301    LAST PULLING MACHINE Pneumatic hydraulic last pulling machine with fully adjustable pad for maximum adherence to all types of materials and shoes style. Continue
 
5209 Working bench for the spraying of latex and water glues
5209 Working bench for the spraying of latex and water glues Working bench for the spraying of latex and water glues, with suction system having two upper exhaust fans, two lower exhaust fans, three lateral suction points covered with spongy material and a suction grid mm 1400x600, and with stainless steel guns and stailess steel tank with internal plastic container. Continue
 
A78 | Cutting lather rim edge and apply the adhesive tape machine
A78    Cutting lather rim edge and apply the adhesive tape machine

The A/78-GAZZELLA CE machine is design to batter the cutting lather rim edge and simultaneously apply the adhesive tape to strength the joint with the sole on shoes and booth.

Continue
 
2C10 | GLUE CONTAINER
2C10    GLUE CONTAINER Container with a capacity of about 10 liters suitable for water based glues (or even solvent-based) with and without activator and easy to use. ... Continue
 
OBE 10.11 LP | TACKING MACHINE
OBE 1011 LP    TACKING MACHINE Pneumatic machine to tack the isole to the last by nails, with single-shot mechanism, including insoles trimming device.
Optional head release instead of pedal.

Continue
 
P78 | INSOLE MOULDING PRESS WITH MANUALLY LEADING AND AUTOMATIC UNLEADING
P78    INSOLE MOULDING PRESS WITH MANUALLY LEADING AND AUTOMATIC UNLEADING

Machine to press the insole inserted in the stamp in the wanteed position, in order to avold eventual movings during the pressing operation.

Continue
 
SPT4 | Seam pressing and taping machine
SPT4    Seam pressing and taping machine The SPT4 is a machine used to press and, at the same time, reinforce the seams by applying a self-sticking tape. The arm-shaped structure makes it easy to process the uppers of open and closed footwear, and boots as well. The efficiency of the feeding device of the upper and of the tape applying device accomplishes easy and fast operations. Continue
BOMBELLI GIANCARLO SPA | S.S. DEL SEMPIONE 49/51 | 20015 S.LORENZO DI PARABIAGO (MI) - ITALY
Partita Iva(VAT): IT 00785890120 | Codice Fiscale e Numero Iscrizione Registro Imprese di Varese 00785890120
Meccanografico Varese 028137 | Capitale Soc. Euro 600.000,00 int.versato


Privacy Policy | P.IVA: 00785890120